Volkswagen
Volkswagen Audi Jetta 1k0 614 517 AC/1k0614517AC ABS OEM
Part # 1k0614517AC · Used
Only 1 left
30-day free returns · We check the fit with your VIN · Secure checkout
Volkswagen
Part # 1K0 614 517 CP
Only 1 left · Used
Condition notes: Note: Please check pictures for the condition, Kindly match part number before purchasing.
The abs pump module 1K0 614 517 CP and 1K0907379BE combination represents a genuine OEM Bosch ABS unit designed for Gulf-spec calibration. This used module is intended to restore safe braking performance on compatible Volkswagen, Audi and SEAT vehicles that share the PQ35 platform. The unit includes the hydraulic ABS pump and the electronic control module, delivering coordinated anti-lock braking, electronic brake-force distribution and traction control interface. This is a Gulf-spec unit, which means it carries regional calibration for higher-temperature environments and specific markets. When installed and coded, it can help maintain factory-level safety features and diagnostic integrity.
Overview and purpose: The ABS pump module is a critical part of the vehicle’s brake system. It modulates brake pressure to prevent wheel lock during heavy braking, supports stability control interfaces, and communicates with the vehicle’s ECU to maintain optimal braking performance. Using an OEM unit helps preserve compatibility with sensors, wiring harnesses, and other brake components found on VW, Audi and SEAT models built on the PQ35 platform.
The part you’re considering is an ABS Pump + Control Module Assembly combining the hydraulic unit 1K0 614 517 CP with the electronic module 1K0907379BE. It is listed as OEM Used and is compatible with a range of Gulf-spec vehicles. The unit is designed for easy mounting within the factory bracket, and typically requires the correct VW/Audi multi-pin harness for connector compatibility. Buyers should be aware that some regional variants may require coding or adaptation via VCDS or ODIS after installation to align with vehicle-specific configurations.
Key benefits include restoring anti-lock braking function, enabling electronic brake-force distribution, and supporting ESP/ASR interfaces. The OEM Bosch origin is noted, reinforcing trust in compatibility with VW, Audi, and SEAT braking systems. This module is sold as a complete assembly, and the package typically includes the hydraulic unit and control module, with mounting hardware not included unless specified.
| Part Type | ABS Pump + Control Module Assembly |
|---|---|
| Hydraulic Unit | 1K0 614 517 CP |
| Electronic Module | 1K0907379BE |
| Brand | Volkswagen (Bosch OEM) |
| Condition | Used |
| Compatibility | Gulf-spec calibration; VW, Audi, SEAT PQ35 platforms |
This ABS unit is commonly associated with Volkswagen Golf Mk5/Mk6, Jetta, Passat and Tiguan, Audi A3 (8P) and TT (8J), SEAT Leon, Altea and Toledo, and potentially Skoda Octavia depending on regional spec. To confirm fitment, compare part numbers 1K0 614 517 CP and 1K0907379BE with your vehicle’s OE numbers, and verify VIN-specific compatibility if needed. Regional Gulf-spec calibration should be considered when matching the exact vehicle configuration.
Fitment confirmation can be aided by matching the part numbers and cross-referencing with VIN data or regional specifications. When in doubt, contact us with your VIN or region for fitment support.
This unit is listed as Used – Genuine OEM and has been tested to ensure functionality. There are no fluid leaks, and connectors and housing are intact. The condition description notes possible minor cosmetic wear consistent with prior installation. Buyers should expect standard wear and may require re-coding in the vehicle’s system after installation.
Included: 1x ABS Hydraulic Unit + Control Module – OEM Used (Bosch). Mounting bracket and hardware are not included unless specified in the listing.
Before installing, verify part numbers and compatibility with your VIN. Some Gulf-spec units may require adaptation via diagnostic tools such as VCDS or ODIS. It is often recommended to have professional installation to ensure correct electrical connections and proper coding. After installation, clear any fault codes and verify ABS functionality with a safe test drive in a controlled environment.
Gulf-spec indicates regional calibration for Gulf/Middle East markets, potentially influencing high-temperature performance and calibration parameters.
May require coding or adaptation via VCDS or ODIS to align with your vehicle’s configuration and VIN.
Pack includes the ABS Hydraulic Unit and Electronic Control Module (1x each) as listed; mounting bracket hardware is not included unless stated.
This part is also listed in our eBay store, with the same photos, item specifics and compatibility: view eBay item 327108258743.
Fitment can change within a model year: check the trim and engine, and match the part number on your old part.
No vehicles listed for this part. Match the part number before you buy.
No reviews yet. Bought this part? You can review it from your order page once it ships.
Volkswagen
Part # 1k0614517AC · Used
Only 1 left
Free shipping
Estimated delivery Thu, Nov 26 – Wed, Dec 2
This is a Gulf-spec OEM used ABS pump module, part numbers 1K0 614 517 CP and 1K0907379BE, compatible with select VW, Audi, SEAT models. It restores braking control and electronic stability functions when installed and coded as needed.
Choose your vehicle to check.
Note: Please check pictures for the condition, Kindly match part number before purchasing.
Volkswagen
Part # 1K0 614 517 EJ, 1K0614517EJ, 1K0-614-517-EJ · Used
Only 1 left
Suzuki
Part # 77k0, abs 77k0 · Used
Only 1 left
Suzuki
Part # 77k0, abs 77k0, 06.2102-1029.4 · Used
Only 1 left