Toyota
pneumatic cylinder rear rh/lh toyota 48080-34010 sequoia
Part # 48080-34010, 4808034010 · New
Only 1 left
30-day free returns · We check the fit with your VIN · Secure checkout
Toyota
Part # 89661-0C580 · Fits 2005 Toyota Sequoiaand 3 more
Only 1 left · Used
Condition notes: Please check compatibility, item is in working condition As pictured
Free shipping
Estimated delivery Thu, Nov 26 – Wed, Dec 2
Genuine OEM Engine Control Unit 89661-0C580 for Toyota Sequoia (2004-2005) with 2UZ-FE 4.7L V8 DOHC EFI. Used, in working condition, compatible with SR5 and Limited trims.
Choose your vehicle to check.
The focus keyword ecu toyota sequoia 89661-0c580, the part number and the brand Toyota, describe a genuine used Engine Control Unit designed for the Sequoia from 2004 to 2005. This ECU is identified by 89661-0C580 and is suitable for the 2UZ-FE 4.7L V8 DOHC EFI engine. It is a Toyota OEM component intended to manage fuel injection, ignition timing, emissions, and related transmission logic. This original ECU is intended for Sequoia models equipped with either 2WD or 4WD drivetrains and automatic transmissions. It is suitable for Sequoia SR5 and Limited trims with matching engine and transmission configurations. Please verify part number, connector layout, and calibration ID before purchase to ensure proper compatibility.
The ecu toyota sequoia 89661-0c580 is a factory-installed Engine Control Module (ECU) used in Toyota Sequoia models around 2004 and 2005. As a genuine Toyota OEM part, it is designed to control critical engine and vehicle functions, including fuel injection, ignition timing, emissions controls, idle speed, and throttle response. This unit integrates with the vehicle’s CAN bus network and coordinates with other ECUs to ensure smooth engine operation and reliable performance. This particular ECU is suitable for Sequoia with the 2UZ-FE 4.7L V8 DOHC EFI engine and is compatible with both 2WD and 4WD configurations and automatic transmission systems.
| Label | Value |
|---|---|
| Part Type | Engine Control Unit (ECU) |
| OEM Part Number | 89661-0C580 |
| Alternate Interchange | 89661 0C580, 89661-0C580, 896610C580 |
| Brand | Toyota |
| Vehicle | Toyota Sequoia (2004–2005), 4.7L V8 DOHC EFI |
| Engine | 2UZ-FE 4.7L V8 DOHC EFI |
| Drive | 2WD / 4WD |
| Transmission | Automatic |
| Condition | Used |
Fits Toyota Sequoia from model years 2004 and 2005, including SR5 and Limited trims, with the 4.7L V8 DOHC EFI engine. The ECU is compatible with both two-wheel drive and four-wheel drive configurations and automatic transmissions. To confirm fitment, compare the part number 89661-0C580, the connector layout, and the calibration ID with the original ECU removed from the vehicle.
This is a used OEM engine control unit. It was removed from a running vehicle and shows no water damage or burnt pins. Connector tabs are intact, though the housing may display minor wear due to prior use. It is sold as-is, and professional installation plus ECU programming or immobilizer pairing may be required to ensure full compatibility with your vehicle.
Included is the Genuine Toyota OEM ECU 89661-0C580. The listing notes indicate it is a fully functional used unit; no additional accessories are listed or included beyond the ECU itself.
When installing an used ECU, ensure the replacement part matches the original OEM number and has compatible calibration. A professional technician can perform immobilizer pairing or VIN programming if required by Toyota. After installation, scanning for codes and performing a proper re-learn procedure may be necessary to restore optimal fuel, ignition, and transmission behavior.
Yes, this ECU is the OEM part 89661-0C580 designed for the Sequoia 2004–2005 with the 2UZ-FE 4.7L V8 DOHC EFI engine and automatic transmission. Confirm by matching the part number, connector layout, and calibration ID.
This is a used OEM ECU. It was removed from a running vehicle and is sold in as-is condition with minor wear possible on the housing.
It may require immobilizer pairing or VIN programming by a Toyota technician. Professional installation is recommended to ensure proper function with your vehicle's immobilizer and CAN bus network.
This part is also listed in our eBay store, with the same photos, item specifics and compatibility: view eBay item 326860453935.
Please check compatibility, item is in working condition As pictured
Fitment can change within a model year: check the trim and engine, and match the part number on your old part.
| Year | Make | Model | Trim | Engine |
|---|---|---|---|---|
| 2005 | Toyota | Sequoia | Limited Sport Utility 4-Door | 4.7L 4663CC 285Cu. In. V8 GAS DOHC Naturally Aspirated |
| 2005 | Toyota | Sequoia | SR5 Sport Utility 4-Door | 4.7L 4663CC 285Cu. In. V8 GAS DOHC Naturally Aspirated |
| 2004 | Toyota | Sequoia | Limited Sport Utility 4-Door | 4.7L 4663CC 285Cu. In. V8 GAS DOHC Naturally Aspirated |
| 2004 | Toyota | Sequoia | SR5 Sport Utility 4-Door | 4.7L 4663CC 285Cu. In. V8 GAS DOHC Naturally Aspirated |
Toyota
Part # 48080-34010, 4808034010 · New
Only 1 left
Toyota
Part # 23829-50070 · New
Only 1 left
Toyota
Part # 04446-53030 · New
Only 1 left
Toyota
Part # 16371-50040 · New
Only 1 left
No reviews yet. Bought this part? You can review it from your order page once it ships.
Toyota
Part # 89540-60160 · Used
Only 1 left
Lexus
Part # 89540-24150 · Used
Only 1 left
Aisin
Part # 89530-35310 · Used
Only 1 left
Toyota
Part # 89533-35290 · Used
Only 1 left